Main Features; Operation Modes - Dogtra iQ No Bark Collar Guide D'utilisation

MAIN FEATURES

- Reduced size receiver
- Replaceable Coin Lithium Batteries (2)
- Low to Medium power unit with 10 levels of stimulation
- Non-stimulating Pager and Test modes
- Bark recognition sensor
- Fully waterproof
- Conductive plastic contact points
- Ergonomically designed to reduce pressure on your dog
- Detachable collar strap
DESCRIPTION
Conductive plastic contact points
② LED
battery
life indicator
Bark recognition sensor
Battery cover
10
On/Off and
①
intensity dial
Detachable strap
How to Use the On/Off and Intensity Dial (picture ① )
- The On/Off & Intensity Dial on the collar is used to turn the iQ No Bark
Collar on and off, to select the intensity level, and to test the no bark collar.
- Set the On/Off & Intensity Dial to the "
Bark Collar.
- When the dial is set to the pager mode (P), the collar will only vibrate.
- Level (1) is the lowest stimulation level with level (10) being the highest.
On each level, a vibration is followed by the stimulation.
- Set the On/Off & Intensity Dial to the test mode (T) to test the iQ No Bark
Collar. See the Testing Guide for directions on how to test the iQ No Bark
Collar.
On/Off
&Intensity Dial
∙
P
1~10
T
NOTICE
When first using the iQ No Bark Collar, it is recommended that you start
with the lowest level. If the dog continues to bark, gradually increase
the intensity level. Closely monitor your dog's reaction to find the right
stimulation level.
LED battery life indicator (picture ② )
The LED indicator will flash for 1 second when the iQ No Bark Collar has
been turned on, and every 2 seconds afterwards. If your dog does not bark
for over 10 seconds, the LED indicator will turn off and the iQ No Bark
Collar will go into a sleep mode to conserve battery life. It will reactivate
when your dog barks and a vibration/correction needs to be made.

Operation modes

1. Non-stimulating Pager vibration mode
- Turn the intensity dial to P.
- When your dog barks, the iQ No Bark Collar will vibrate twice.
2. Stimulation modes 1-10
- Stimulation levels from 1 to 10, with 1 being the lowest level and 10
being the highest level.
" position to turn off the iQ No
∙
Function
Power Off
Vibration only (non-stimulation)
Vibration followed by stimulation
est mode
11