Introduction
Installation Guidelines
Installation Guidelines
•
Make sure to locate the detector and sensing assembly(ies) in an
area easily accessible to a technician.
•
Avoid any location where the detector could be subject to
vibrations.
•
Avoid any location close to noisy equipment.
•
Avoid any location where temperature changes occur rapidly.
•
Verify all the requirements and existing regulations which may
affect the choice of location.
•
For Duct-Type housing, installation is recommended on a straight
duct at least 3 feet (1m) away from any curve.
12
90DM4 User Manual
Honeywell
511105
2/07