Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
When shipped from the factory, the element retainer is in its maximum position. Use a flat-head
screwdriver to adjust the amount of steam released. When not in use, the element retainer should
be returned to its maximum position. If steam should leak from the gland case or gland retainer, it
can be stopped by further tightening the gland retainer.
Unscrew the gland retainer nut and the gland case and take off all parts. Check for dirt, oil and
damage. Replace damaged parts. Before reassembling, replace the gland packing. Replace the
gasket only if necessary.
1) Warranty Period: one year after product delivery.
2) TLV CO., LTD. warrants this product to the original purchaser to be free from defective
materials and workmanship. Under this warranty, the product will be repaired or replaced at
our option, without charge for parts or labor.
3) This product warranty will not apply to cosmetic defects, nor to any product whose exterior
has been damaged or defaced; nor does it apply in the following cases:
1. Malfunction due to improper installation, use, handling, etc., by other than TLV CO., LTD.
authorized service representatives.
2. Malfunctions due to dirt, scale, rust, etc.
3. Malfunctions due to improper disassembly and reassembly, or inadequate inspection and
maintenance by other than TLV CO., LTD. authorized service representatives.
4. Malfunction due to disasters or forces of nature.
5. Accidents or malfunctions due to any other cause beyond the control of TLV CO., LTD.
4) Under no circumstances will TLV CO., LTD. be liable for consequential economic loss or
damage or consequential damage to property.
Gland Retainer Nut
Gland Packing
Gland Case
Gasket
Element Retainer
Spring Pin
̶ 13̶
Stamped 3 or 5
3 = J(F)3X
5 = J(F)5X
Distance across flats :
"
22 mm (
)
7
8
Distance across flats :
"
19 mm (
3
)
4
Torque:
30 N ・ m (22 lbf ・ ft)
1 N ・ m
10 kg ・ cm
Publicité
Table des Matières
