Wiring; Disconnect A Probe - ADEUNIS TEMP V4 IP68 Sigfox RC1 Guide Utilisateur

TEMP V4 IP68 Sigfox RC1 - Guide utilisateur / User guide version V3.1.1
WARNING : the probe must be manipulated at room temperature, risk of damage if handled in negative temperatures or above 90°C.

5. WIRING

1
FR
EN
2
3
Using a suitable screwdriver,
unscrew the terminal block to
detach the wires

5.1. Disconnect a probe

To disconnect a probe, please follow these instructions:
Remove the
screws
1
5V + - 1 2 3 4
Unscrew the cable
gland to loosen
the cable
2
2 1
5V + - 1 2 3 4
4
5V + - 1 2 3 4
Once the cable has been removed, insert the
gland plug provided in the package to maintain
the watertightness of the product
Open the product by
pulling on the cable
gland
WARNING : do not
pull on the wires
54 of 57