Sony MSAC-FD1A Mode D'emploi page 6

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Installing lithium batteries (continued)
3
Replace the battery covers
After replacing the battery cover, press down and hold the upper
groove with your finger and turn it clockwise until the mark is aligned
with the arrow LOCK mark.
P Notes
• Always replace both batteries at the same time.
• When attaching the battery cover, make sure you do not apply too much force
in pressing on the cover. Too much force could break the cover.
P WARNING
The battery may explode if mistreated. Do not recharge, disassemble, nor
dispose of it in fire.
P Lithium Battery
• Use lithium button battery CR2016. Use of any other battery may present a
risk of fire or explosion. Discord used batteries according to the
manufacturer's instructions.
• Keep the lithium battery out of the reach of children.
• Should the battery be swallowed, immediately consult a doctor.
• Wipe the battery with a dry cloth to ensure good contact.
6-US
mark on
battery
cover

Publicité

Chapitres

Table des Matières
loading

Table des Matières