Luggage rack on the fork
CAUTION
Risk of accident due to a damaged fork caused by using incompatible mounts!
If you use accessory mounts on the fork that do not rest on the thread rivets, the thread rivets and thus the fork will be
damaged by tightening the fastening bolts.
Torn thread rivets can affect the strength of the fork and lead to falls and accidents!
• Only use mounts that rest fully on the fork, e.g. the ROSE Gravel Cage (prod. code 2300339).
A luggage rack can be attached via the threaded eyelets on the fork (4). No lowrider may be mounted! We recommend
mounting the ROSE Gravel Cage (prod. code 2300339).
The maximum load on the fork must not exceed 3 kg per side!
The screws in the threaded eyelets may be tightened with a maximum torque of 2 Nm.
Mounting mudguards
4
5 Nm
The frame of the ROSE HOBO has threads on the dropouts (4), on the seat stay bridge (3) and on the fork (1, 2) for
mounting mudguards on the front and rear wheel.
A special mudguard kit for the HOBO is available at www.rosebikes.com.
The bolts in the threads may be tightened to a maximum torque of 5 Nm.
Scan the QR code to go directly to the HOBO mudguards manual.
44
3
5 Nm
4
5 Nm
5
5 Nm
1
5 Nm
2
5 Nm