Gentle Cool Air; Plasmacluster Operation - Sharp AH-XP10UHD Mode D'emploi

GENTLE COOL AIR

The vertical airflow louvre is set
obliquely upward to deliver cool air
to the ceiling in order to avoid direct
airflow.
1
During operation, press the
GENTLE COOL AIR button.
• The remote control will display "
TO CANCEL
Press the GENTLE COOL AIR button
again.
NOTE:
• If you want GENTLE COOL AIR operation
in POWERFUL JET mode, press GENTLE
COOL AIR button during POWERFUL JET
operation.
INVERTER_OM A881_EN.indd EN-7 INVERTER_OM A881_EN.indd EN-7
".
1
SENSOR
EN-7

PLASMACLUSTER OPERATION

(For High end models only)
Plasmacluster ions released into the room
will reduce some airborne mold.
1
During operation, press the PLAS-
MACLUSTER button.
• The remote control will display "
• The blue PLASMACLUSTER lamp (
will light up.
TO CANCEL
Press the PLASMACLUSTER button again.
• The blue PLASMACLUSTER lamp (
will turn off.
NOTE:
• Use of the PLAMASCLUSTER operation will
be memorized, and it will be activated the
next time you turn on the unit.
• To perform Plasmacluester operation in FAN
only mode, press the PLASMACLUSTER
button when the unit is not operating.
The mode symbol of the remote control will
go off and the fan speed cannot be set to
AUTO.
".
)
)
1
SENSOR
11/8/2559 BE 5:14 PM 11/8/2559 BE 5:14 PM