Adjusting The Air Flow Direction - Sharp AY-XPM7FR Mode D'emploi

ADJUSTING THE AIR FLOW DIRECTION

VERTICAL AIR FLOW DIRECTION
The air flow direction is automatically preset in each mode as follows for optimum
comfort:
COOL and DRY modes
HEAT mode
HOW TO ADJUST THE AIR FLOW DIRECTION
Press the SWING button on the
remote control once.
• The vertical adjustment louvres
will change its angle continu-
ously.
Press the SWING button again
when the vertical adjustment
louvres are at the desired
position.
• The louvre will stop moving within
the range shown in the diagram.
• The adjusted position will be
memorized and will be automati-
cally set to the same position
when operated the next time.
HORIZONTAL AIR FLOW DIRECTION
Hold the horizontal adjustment
louvre as shown in the diagram
and adjust the air flow direction.
CAUTION
Never attempt to adjust the vertical adjustment louvres manually.
• Manual adjustment of the vertical adjustment louvre can cause the unit to malfunction
when the remote control is used for adjustment.
• When the vertical adjustment louvre is positioned at the lowest position in the COOL or
DRY mode for an extended period of time, condensation may result.
Do not adjust the horizontal adjustment louvre to the extreme left or right in the COOL mode
with the fan speed set to "SOFT (
Condensation may form on the louvres.
Horizontal air flow
Diagonal air flow
Adjustment range
COOL and DRY modes
The adjustment range
is narrower the SWING
range in order to pre-
vent condensation from
dripping.
)" for an extended period of time.
E-10
HEAT mode
The range is wide and
air flow can be directed
toward the floor.