Publicité
Janome HD 1000 Sewing Machine Instruction Manual
w
e
q
www.janomeflyer.com
Setting Spool Pins
The spool pins are used for holding the spools
of thread when feeding the thread to the ma-
chine.
Spool pins are separately packed to prevent any
damage in transit.
Therefore, fix the holder of spool pins in place with
a screwdriver, as shown in the figure.
Presser Foot Lifter
q Presser foot lifter
w Normal up position
e Highest position
e
The presser foot lifter raises and lowers the
presser foot.
You can raise it about 1/4" (0.6 cm) higher than
w
the normal up position for easy removal of the
presser foot, or to help place heavy fabric under
the foot.
q
Thread Cutter
q Thread cutter
You do not need a pair of scissors to cut threads
after sewing. Simply use the built-in thread
cutter.
Accessory Storage Box
Sewing accessories are conveniently located
under the extension table.
8
HD1000 Owners Manual/ User Guide
Publicité
