Benelli TNT125 2020 Manuel Du Propriétaire page 155

Periodic maintenance and adjustment
Replacing the fuses
The fuse boxes and individual fuses are
located under the rider seat.
To access fuse box, the main fuse, and the
fuel injection system fuse, remove the ri-
EN
der seat. (See page 3-11).
6
If a fuse is blown, replace it as follows.
1. Turn the key to " " and turn o the
electrical circuit in question.
2. Remove the blown fuse, and then install
a new fuse of the speci ed amperage.
WARNING
Do not use a fuse of a higher amperage
rating than recommended to avoid cau-
sing extensive damage to the electrical
system and possibly a re.
1 2 3 4
1. Injection
2. Main
3. Spare
4. Spare
6 - 28
Speci ed fuses:
Injection fuse: 15.00A
Main fuse: 20.00 A
Spare fuse: 15.00 A
Spare fuse: 20.00 A
3. Turn the key to " " and turn on the
electrical circuit in question to check if the
device operates.
4. If the fuse immediately blows again,
have a Benelli dealer check the electrical
system.