Benelli TNT125 2020 Manuel Du Propriétaire page 140

Air lter element
The air lter element must be replaced
at the intervals speci ed in the periodic
maintenance and lubrication chart.
Replacing the air lter element
1. Place the vehicle on a surface and keep
it upright.
2. To remove the rider seat.
3. Remove the air lter cover by removing
the screws (C).
C
4. Pull the air lter element out. (B).
5. Insert a new air lter element into the
air lter case.
6. Install the air lter case cover (A) by in-
stalling the screws (C).
Periodic maintenance and adjustment
Checking the engine idling speed
Check the engine idling speed and, if ne-
cessary, have it corrected by a Benelli de-
aler.
A
B
6 - 13
Engine idling speed:
1400-1600 r/min.
EN
6