Functional Description - Milwaukee M18 FORCE LOGIC 2679-20 Manuel De L'utilisateur

Sertisseur utilitaire 600 mcm

Masquer les pouces

Table Des Matières

Table des Matières

Les langues disponibles

• Under abusive conditions, liquid may be ejected

from the battery; avoid contact. If contact ac-

cidentally occurs, flush with water. If liquid con-

tacts eyes, additionally seek medical help. Liquid

ejected from the battery may cause irritation or burns.

• Do not use a battery pack or tool that is dam-

aged or modified. Damaged or modified batteries

may exhibit unpredictable behavior resulting in fire,

explosion or risk of injury.

• Do not expose a battery pack or tool to fire or

excessive temperature. Exposure to fire or tem-

perature above 265°F (130°C) may cause explosion.

• Follow all charging instructions and do not

charge the battery pack or tool outside the

temperature range specified in the instructions.

Charging improperly or at temperatures outside the

specified range may damage the battery and increase

the risk of fire.

SERVICE

• Have your power tool serviced by a qualified

repair person using only identical replacement

parts. This will ensure that the safety of the power

tool is maintained.

• Never service damaged battery packs. Service

of battery packs should only be performed by the

manufacturer or authorized service providers.

SPECIFIC SAFETY RULES FOR

CRIMPER

• Use tool only as directed. Only trained personnel

should operate tool.

•

To reduce the risk of arc flash,

WARNING

electric shock and property

damage, work on deenergized lines when

possible. Tool is not insulated. Should work

on energized lines be required, ensure all proper

precautions, including those contained in NFPA

70E, have been taken first.

• Use tool only with MILWAUKEE crimping jaw

49-16-U000 or 49-16-U111, "U" dies, and con-

nectors for which they are rated. Jaws, dies,

and connectors must be used in an APPROVED

COMBINATION to achieve a successful opera-

tion. Improper combinations can result in a faulty

crimp. Electric shock, fire, explosion, and property

damage could occur.

• Do not use tool without jaws installed. Fingers

could be injured.

• Keep hands away from jaws while tool is in use.

Fingers could be injured.

•To reduce the risk of injury, wear safety goggles

or glasses with side shields when operating or

servicing the tool.

• Inspect and discard workpieces with cracks or

wear before use. Materials may crack or shatter.

• Follow installation specifications as specified in

Table A using an Approved Combination of jaws,

dies, connectors and cables as indicated. Other

uses may cause damage to the tool, accessories,

and workpiece.

• Always use common sense and be cautious when

using tools. It is not possible to anticipate every

situation that could result in a dangerous outcome.

Do not use this tool if you do not understand these

operating instructions or you feel the work is beyond

your capability; contact Milwaukee Tool or a trained

professional for additional information or training.

• Maintain labels and nameplates. These carry im-

portant information. If unreadable or missing, contact

a MILWAUKEE service facility for a free replacement.

•

Some dust created by power sanding,

WARNING

sawing, grinding, drilling, and other

construction activities contains chemicals known to

cause cancer, birth defects or other reproductive

harm. Some examples of these chemicals are:

• lead from lead-based paint

• crystalline silica from bricks and cement and other

masonry products, and

• arsenic and chromium from chemically-treated lumber.

Your risk from these exposures varies, depending on

how often you do this type of work. To reduce your

exposure to these chemicals: work in a well ventilated

area, and work with approved safety equipment, such

as those dust masks that are specially designed to

filter out microscopic particles.

SPECIFICATIONS

Cat. No. ..................................................... 2679-20

Volts .............................................................. 18 DC

Battery Type .................................................M18™

Charger Type ................................................M18™

Operating Temp ..................................... 0° - 122° F

Force ............................................................ 6 Tons

Crimping Jaws

Cat. No .................................................49-16-U000

Jaw Type .........................M18™ 600 MCM U Style

Max. Crimping Capacity .......................... 600 MCM

Cat. No .................................................49-16-U111

Jaw Type .........................M18™ 750 MCM U Style

Max. Crimping Capacity .......................... 750 MCM

Cable Cutting Jaws

Cat. No ................................................. 49-16-2780

Jaw Type ......... M18™ 750 MCM Cu/1000 MCM AI

Max. Cutting Capacity ............................. 750 MCM

Replacement Blades .............. Cat. No. 48-44-0411