Using The Bluetooth Audio Player - JVC KD-AHD69 Manuel D'instructions

Direct dialing:
1 Select "NUMBER."
2 Select a number.
[Turn]
3 Move to the next (or previous) number
position.
4 Repeat steps 2 and 3 until you finish
entering the phone number.
5
Voice dialing:
1 Select "VOICE DIAL."
"SAY NAME" appears on the display.
2 Speak the name you want to call.
• If your mobile phone does not support the
voice recognition system, "ERROR" appears
on the display.
• Using "VOICE DIAL" may be difficult in a
noisy environment or at an emergency.
18
Using the Bluetooth audio
player
Select "BT AUDIO."
If playback does not start,
operate the Bluetooth audio
player to start playback.
Reverse skip/forward skip
Pause/start playback*
Enter the Bluetooth menu (see
page 26)
* Operation may be diff erent according to the connected
Bluetooth audio player.
• Refer also to page 16 for connecting/disconnecting/
deleting a registered device.
• When the sound is stopped or interrupted while
using a Bluetooth device, turn off, then turn on the
unit.
– If the sound is not yet restored, connect the device
again (see page 16).