JVC KD-AHD69 Manuel D'instructions page 39

Masquer les pouces Voir aussi pour KD-AHD69:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Symptoms
• Noise is generated.
• "READING" keeps flashing on the display.
• "NO FILE" appears on the display.
• Tracks/folders are not played back in the
order you have intended them to play.
• "CANNOT PLAY" appears on the display.
• "NO USB" appears on the display.
• The unit cannot detect the USB device.
• "NOT SUPPORT" appears on the display.
• The correct characters are not displayed
(e.g. album name).
• While playing a track, sound is sometimes
interrupted.
Remedies/Causes
• The track played back is not a playable file format.
Skip to another file.
• Do not add the extension code <.mp3> or <.wma>
to non-MP3 or WMA tracks.
• Readout time varies depending on the USB device.
• Do not use too many hierarchy or folders.
• Turn off the power then on again.
• Do not pull out or connect the USB device repeatedly
while "READING" is shown on the display.
Check whether the selected folder, the connected USB
device, or the iPod/iPhone contains a playable file.
The playback order is determined by the file name.
Folders with numbers on the start of their names are
sorted in numerical order. However, folders with no
numbers on the start of their names are sorted according
to the file system of the USB device.
• Check whether the connected USB device or the iPod is
compatible with this unit.
• The USB device is not connected properly. Connect the
USB device again.
Check whether the track is a playable file format.
This unit can only display letters (upper case), numbers,
and a limited number of symbols.
The tracks have not been properly copied into the USB
device. Copy tracks again into the USB device, and try
again.
REFERENCES
39

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Kd-hdr60

Table des Matières