Publicité
Les langues disponibles
Les langues disponibles
Periodic maintenance and adjustment
Carefully lift the tank and disconnect the
fuel level probe connector.
EN
6
7. Fuel level probe connector
WARNING
Never attempt to remove the radiator
cap when the engine is hot.
Add coolant or distilled water to raise the
coolant up to the maximum level mark,
install the coolant reservoir cap.
7
8
8. Refrigerant liquid tank
9. Coolant tank cap
NOTICE
If coolant is not available, use distilled
water or non-calcareous tap water in-
stead. Do not use limestone or salt wa-
ter, as they are harmful to the engine. If
you have used water instead of refrige-
rant, replace it with coolant as soon as
possible, otherwise the cooling system
would not be protected from frost and
corrosion. If water has been added to
the refrigerant, have a refrigerant con-
tent checked as soon as possible by a
Benelli dealer, otherwise the e ciency
of the coolant will be reduced.
To change the coolant
1. Place the vehicle on a level surface and
keep it straight.
2. Place a container under the engine to
collect the used coolant.
3. Remove the radiator cap.
9
Never attempt to remove the radiator
cap when the engine is hot.
6 - 14
WARNING
1. Radiator Cap
1
Publicité
