Publicité
Les langues disponibles
Les langues disponibles
Instrument and control functions
1. LH direction indicator light
The left indicator light will ash when the
corresponding direction indicator lights
are activated.
EN
2. RH direction indicator light
The right indicator light will ash when
3
the corresponding direction indicator li-
ghts are activated.
3. High beam indicator light
This warning light comes on when the he-
adlight is in the high beam position.
4. Neutral indicator light
This indicator light comes on when the
transmission is in the neutral position.
5. Water temperature warning lamp
When the light comes on, stop and con-
tact the Benelli assistance service.
6. Total kilometre counter
The totalizer odometer records the total
mileage driven.
7. Water temperature indicator
This indicator indicates the temperature
of the coolant. When the pointer is betwe-
en C and H, the temperature is normal.
8. Gear engaged indicator light
The numbers on the indicator indicate the
positions of the gearbox and gear enga-
ged (1, 2, 3, 4, 5 and 6).
9. Tachometer
Indicates the rotation of the engine per
minute.
10. Speedometer
Indicates the driving speed, kilometers /
hour.
11. Oil pressure warning light
When this indicator lights up, it means
that the lubrication is insu cient and the
bike must be checked / repaired immedia-
tely.
12. Partial kilometre counter
Trip meter can be reset, which records the
mileages driven in a speci c period.
3 - 4
13. Fuel reserve warning light
Indicates that the residual fuel is approxi-
mately 3 L.
14. Digital clock
Indicates the time expressed in hours and
minutes.
15. Engine fault indicator light
This warning light comes on if a fault is
detected on the engine or another vehicle
control system. If this happens, have the
on-board diagnostic system checked by a
Benelli dealer.
16. Fuel gauge
Indicates the fuel level in the tank.
17. ABS warning light
When the control panel is switched on,
the ABS diagnostic warning light will re-
main on until the motorcycle reaches a
speed of about 5 km / h. Once this speed
is exceeded, the ABS diagnostic indicator
will go out.
ABS system error: if any type of error is
detected and stored, the ABS diagnostic
lamp will be on and remain on.
The ABS diagnostic warning light will swi-
Publicité
