Publicité
Les langues disponibles
Les langues disponibles
No.
Item
1
Ctrl. state
2
2-Way valve
Solar setting
3
4
Water tank
Without/Air/Air+ hot water/
5
Thermostat
Other thermal
6
Optional
7
E-Heater
Remote
8
sensor
9
Air removal
Floor debug
10
Manual
11
defrost
12
Force mode
13
Tank heater
14
Gate-Ctrl.
Commissioning Function Setting
Range
T-water out/T-room
Cool 2-Way valve, On/Off
Heat 2-Way valve, On/Off
With/Without
With/Without
Air+ hot water2
On/Off
With/Without
Off/1/2
With/Without
On/Off
On/Off
On/Off
Off/Force-cool/Force-heat
Logic 1/Logic 2
On/Off
Default
When "Remote sensor" is set to "With", it can
T-water out
be set to "T-room".
It will decide the status of the 2-way valve
under the "Cool" and "Cool + Hot water"
modes.
Off
Under "Cool" or "Cool + Hot water" mode,
the status of the 2-way valve depends on this
setting. This setting is unavailable to heating
only units.
It will decide the status of the 2-way valve
On
under the "Heat" and "Heat + Hot water"
modes
When the water tank is unavailable, this setting
will be reserved.
When it is set to "With", the solar kitting will
Without
work on its own.
When it is set to "Without", hot water by the
solar kitting is unavailable.
Without
Unavailable to mini chillers.
This setting cannot be interchanged among
"Air" , "Air+ hot water" and "Air+ hot water2"
Without
directly but via "Without" this option.
Off
This setting is available to mini chillers.
Without
/
Off
/
When it set to "Without", and the "Ctrl. state"
Without
will be defaulted to be "T-water out".
Off
/
Off
/
Off
/
"
Force-cool
Off
units.
This setting is allowed when the water tank is
Logic 1
available and the control panel is OFF.
Off
19
Description
"
is unavailable to heating only
/
Publicité
