Publicité
Les langues disponibles
Les langues disponibles
2.2.18 Child lock
[Operation Instructions]
At the function setting page, by touching "Child Lock", it can be set to "On" or "Off".
When it is set to "On", the control panel will go back to the home page and a lock icon
shown in the figure below.
In this case, the control panel is locked and any touch operation does not work. By touching
the control panel will be unlocked and touch operation will work. However, the setting of "Child Lock" will remain to
be "On", and if there is no any operation in 30 seconds, the control panel will be locked again.
Only when it is set to "Off", this function will be really disenabled.
2.2.19 Daylight Saving Time
[Operation Instructions]
When it has been activated, it allows to set "Time lag", "Time lead" and "Transform time". The system clock
of the control panel will be delayed for some time at the "Transform time" of last Sunday in March, and will be
advanced for some time at the "Transform time" of last Sunday in October.
"Time lag" is used for March and "Time lead" is for October.
For example, if March 30 is the last Sunday of this month, when the system clock goes to March 30, 2:00, the
system clock will be lagged automatically for one hour. That is, the displayed system time will become to be March
30, 3:00.
For example, if October 30 is the last Sunday of this month, when the system clock goes to October 30, 2:00,
the system clock will be advanced automatically for one hour. That is, the displayed system time will become to be
October 30, 1:00.
When there is a timer setting at the "Time lag" period, then this timer setting goes invalid in this period.
15
will be diplayed, as
for six seconds,
Publicité
