Télécharger Imprimer la page

TechniSat DIGITRADIO 140 Manuel D'instructions page 23

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 60
5 Internet radio
The DigitRadio 140 is equipped with an Internet radio receiver. In order to receive Internet radio stations/channels, you need an
Internet connection using a connected LAN cable or connection to a wireless network. Consult Section 14.2 as to how to set up
an Internet connection.
Press the MODE button as often as required until [Internet Radio] is shown on the display.
>
Alternatively:
>
Press the MENU button and then select Main menu > Internet radio.
If you are in a submenu, select the main menu as described in Section 3.7.
If you start the Internet radio mode for the first time without having configured a LAN or WLAN connection during the
initial set-up, the search wizard appears which shows you all the WLAN stations within range. Use the OK button to
select the WLAN network you know and enter the password using the displayed keyboard. Then select
the OK button. If the password entered is correct a connection to the network is now established. The signal bar
the status bar of the display indicates whether the connection has been established. To cancel the entry, select
and press the OK button. If you make a typing error you can delete the last letter entered using
5.1 Last listened to
>
Select MENU > Last listened to, to display a list with the last stations listened to.
>
Using the up/down arrow buttons select a station and play it by pressing OK.
5.2 Station list
>
Press the MENU button and select the station list from the available categories.
Under Station list, all Internet radio stations are displayed divided into different categories. You can also access to your
Favourites here.
>
Based on a category/country/genre, select a station and press the OK button.
EN
FR
and press
IT
in
NL
.
NW
DK
PL
CZ
SK
23

Publicité

loading