Télécharger Imprimer la page

TechniSat DIGITRADIO 140 Manuel D'instructions page 19

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 60
3.6 Adjusting the volume
Rotate the volume knob (15) on the device to the right or press the VOL+ (23) button on the remote control to increase
>
the volume. Rotate the volume knob (15) on the device to the left or press the VOL- (10) button on the remote control
to reduce the volume.
The set volume is shown on the display while it is being adjusted.
3.7 Menu operation
The menu is divided into the Main Menu, the Submenu for the currently selected source, and System Settings, which apply
to all sources. Operation within the menu takes place using the SCROLL&SELECT knob (14) on the device or using the up/
downarrow buttons (22, 24) and the OK (9) button on the remote control.
>
To open the submenu corresponding to the currently selected source, press the MENU button on the device or on the
remote control.
The source-specific settings and options are in the submenu corresponding to the currently selected source. From here
you can also access the >Main Menu and the >System Settings.
>
You can move the highlight up and down by rotating the SCROLL&SELECT knob to the right and left or by pressing the
arrow buttons on the remote control.
>
You can confirm your choice by pressing the SCROLL&SELECT knob or the OK button on the remote control. If a setting
has been changed, it is saved by pressing the SCROLL&SELECT knob or the OK button. If there is an arrow (>) next to a
menu item, additional settings or functions can be accessed by pressing the SCROLL&SELECT knob or the OK button.
Press the MENU button to exit the menu. Depending on the submenu or option you currently have selected, the MENU
>
button may have to be pressed repeatedly.
>
Should you wish to cancel a setting without saving it, press the MENU button or, alternatively, the BACK (7) button on the
remote control.
The detailed description of the device functions in this instruction manual is given using the buttons on the remote
control.
EN
FR
IT
NL
NW
DK
PL
CZ
SK
19

Publicité

loading