Publicité
Les langues disponibles
Les langues disponibles
Leaking batteries can cause damage to the remote control.
If the device is not being used for a prolonged period, remove the batteries from the remote control.
Important information for disposal: batteries can contain poisonous substances which harm the environment. Therefore,
it is imperative to dispose of the batteries according to the legal provisions in force. Never dispose of the batteries with
normal domestic waste.
3.3 Connection
The audio outputs audio out analogue (18), optical out digital (20) or coaxial out digital (21) are available on the back
>
of the device to connect an A/V amplifier or a stereo system.
Connect the rod antenna included in the supply to the antenna connection (23) and extend it to the desired length.
>
>
Depending on whether you wish to use the LAN connection or the WLAN connection, connect the LAN cable for your
network to the LAN connection (22), or raise the WLAN antenna (17).
>
Then insert the mains cable into a 110-240V ~ 50/60Hz mains outlet.
3.4 Switching on/off
>
To switch on the DIGITRADIO 140, press the on/standby button on the device (15) or on the remote control (14).
To switch off, press the on/standby button on the device (15) or on the remote control (14) again.
>
3.5 Source selection
>
Press the MODE button on the device (5) or on the remote control (8) repeatedly to scroll through the available sources.
Alternatively:
>
Open the submenu in the current source by pressing the MENU button and select >Main menu.
The source currently selected is shown on the display.
18
Publicité
