Husqvarna 320iL Manuel D'utilisation page 9

carried out professionally. If you need further information
please contact your nearest servicing dealer.
WARNING:
damaged safety components. The product's
safety equipment must be inspected and
maintained as described in this section.
If your product fails any of these checks,
contact your service agent to get it repaired.
CAUTION:
on the machine requires special training.
This is especially true of the machine's
safety equipment. If your machine fails
any of the checks described below you
must contact your service agent. When
you buy any of our products we guarantee
the availability of professional repairs and
service. If the retailer who sells your
machine is not a servicing dealer, ask him
for the address of your nearest service
agent.
To do a check of the keypad
• Push and hold the power button (A).
B
a) The product is on when the LED (B) is on.
b) The product is off when the LED (B) is off.
To do a check of the power trigger lockout
The power trigger lockout prevents accidental start.
When you push the power trigger lockout (A) forward,
it releases the power trigger (B). When you release the
handle, the power trigger and the power trigger lockout
move back to their initial positions.
1511 - 013 - 01.11.2023
Never use a product with
All servicing and repair work
A
A
1. Make sure that the power trigger is locked when the
power trigger lockout is in its initial position.
2. Push the power trigger lockout (A) forward. Make
sure that it moves back to its initial position when
you release it.
B
A
9