Husqvarna 320iL Manuel D'utilisation page 16

• Push the left button (A) to set the direction of rotation
to counterclockwise.
A
• Push the right button (B) to set the direction of
rotation to clockwise. The green LED shows the
direction of rotation that is used.
Note:
It is easier to tap out the trimmer line to make it
longer when the trimmer head turns clockwise.
Automatic shutdown function
The product has an automatic shutdown function that
stops the product if the product is not used. The green
Introduction
WARNING:
safety chapter before you do maintenance
on the product.
Maintenance schedule
WARNING:
you do maintenance.
Maintenance
Clean the external parts of the product with a dry cloth. Do not use water.
Examine that the power button works correctly and is not damaged.
Make sure that the power trigger and the power trigger lockout function correctly
from a safety point of view.
Make sure that all controls work and are not damaged.
Keep the handles dry, clean and free from oil and grease.
Make sure that the cutting attachment is not damaged. Replace the cutting
attachment if it is damaged.
Make sure that the cutting attachment guard is not damaged. Replace the cut-
ting attachment guard if it is damaged.
16
B
Maintenance
Read and understand the
Remove the battery before
LED for start/stop indication goes off and the product
stops after 120 seconds.
To stop the product
1. Release the power trigger or the power trigger
lockout.
2. Push the power button until the green LED is off.
3. Push the release buttons on the battery and pull the
battery out.
The following is a list of the maintenance steps that you
must do on the product. See
more information.
Introduction on page 16 for
Daily Weekly Monthly
X
X
X
X
X
X
X
1511 - 013 - 01.11.2023