Publicité
Les langues disponibles
Les langues disponibles
•
Maintain the appliance with care. Follow instructions
for lubricating and changing accessories. Keep the
handles dry, clean, and free from oil and grease.
•
Check for damaged parts. Before using the
appliance, make sure the safety guards are intact.
Never use a tool without its safety guard. Check the
alignment of the moving parts, and check for binding
of the moving parts.
•
Check for broken or defective parts that can affect
the safe operation of your tool. A guard or other
part that is damaged should be properly repaired
or replaced by an authorized service center unless
indicated elsewhere in the manual.
•
Prevent unintentional starting. Ensure the switch
is in the off position before connecting to battery
pack, picking up or carrying the appliance. Carrying
the appliance with your finger on the switch or
energizing an appliance that has the switch on
invites accidents.
•
Disconnect the battery pack from the appliance
before making any adjustments, changing
accessories, or storing the appliance. Such
preventive safety measures reduce the risk of
starting the appliance accidentally.
•
Recharge only with the charger specified by the
manufacturer. A charger that is suitable for one type
of battery pack may create a risk of fire when used
with another battery pack.
•
Use the appliance only with specifically designated
battery packs. Use of any other battery packs may
create a risk of injury and fire.
•
When the battery pack is not in use, keep it away
from other metal objects, like paper clips, coins,
keys, nails, screws or other small metal objects, that
can make a connection from one terminal to another.
Shorting the battery terminals together may cause
burns or a fire.
•
Under abusive conditions, liquid may be ejected from
the battery. Avoid contact. If contact accidentally
occurs, flush with water. If liquid contacts eyes,
additionally seek medical help. Liquid ejected from
the battery may cause irritation or burns.
•
Do not use a battery pack or appliance that
is damaged or modified. Damaged or modified
batteries may exhibit unpredictable behavior
resulting in fire, explosion or risk of injury.
•
Do not expose a battery pack or appliance to
fire or excessive temperature. Exposure to fire or
temperature above 266 °F (130 °C) may cause
explosion.
•
Follow all charging instructions and do not charge
the battery pack or appliance outside of the
temperature range specified in the instructions.
Charging improperly or at temperatures outside of
the specified range may damage the battery and
increase the risk of fire.
•
Have servicing performed by a qualified repair
person using only identical replacement parts.
This will ensure that the safety of the product is
maintained.
1511 - 013 - 01.11.2023
•
Do not modify or attempt to repair the appliance or
the battery pack (as applicable) except as indicated
in the instructions for use and care.
Check before starting
•
Always remove the battery to prevent the product
being started by accident. Always remove the battery
before any maintenance on the product.
•
Before using the product and after any impact,
check for signs of wear or damage and repair as
necessary.
•
Inspect the working area. Remove all loose objects,
such as stones, broken glass, nails, steel wire, string
etc. that could be thrown out or become wrapped
around the cutter or cutter guard.
•
Check the motor for dirt and cracks. Clean off grass
and leaves from the motor using a brush. Gloves
should be worn when necessary.
•
Check that the trimmer head is completely attached
to the trimmer.
•
Check that the product is in perfect working order.
Check that all nuts and screws are tight.
•
Check that the trimmer head and trimmer guard
are not damaged or cracked. Replace the trimmer
head or trimmer guard if they have been exposed
to impact or are cracked. Always use the
recommended guard for the cutting attachment you
are using. See chapter on Technical data.
•
The product operator must ensure that no people or
animals come closer than 15 meters while working.
When several operators are working in the same
area the safety distance should be at least 15
meters.
•
Carry out an overall inspection of the product before
use. See the maintenance schedule.
•
National or local regulations may regulate the use.
Comply to given regulations.
Personal safety
•
The cutting tool does not stop immediately after the
product is turned off.
•
The product is only designed for trimming and
edging.
•
Keep bystanders away.
•
Stay alert, watch what you are doing and use
common sense when operating a power tool. Do not
use a power tool while you are tired or under the
influence of drugs, alcohol or medication. A moment
of inattention while operating power tools may result
in serious personal injury.
•
This appliance is not intended for use by person
(including children) with reduced physical, sensory
or mental capabilities, or lack of experience and
knowledge, unless they have been given supervision
or instruction concerning use of the appliance by a
person responsible for their safety. Children should
be supervised to ensure that they do not play with
the appliance.
5
Publicité
