Disposal And Recycling; Overheating Guard; Ordering Replacement Parts - Einhell Rt-Ew 270 D Mode D'emploi

Masquer les pouces Voir aussi pour RT-EW 270 D:
Table des Matières
Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 16
Anleitung_RT_EW_270D_SPK1:_
Important!
Always use tongs to remove spent electrodes and to
move parts that you have just welded. Please note
that the electrode holder (1) must always be put
down so that it is insulated after you have completed
the welding work.
Do not remove the slag until the weld has cooled.
If you want to continue a weld after an interruption,
the slag from your initial attempt must first be
removed.

9. Overheating guard

The welding set is fitted with an overheating guard
that protects the welding transformer from
overheating. If the overheating guard trips, the
control lamp (5) on your set will be lit. Allow the
welding set to cool for a time.
10. Socket (12)
The welder has a 230 V ~ 50 Hz socket on the back
side protected by a 6 A overload switch (11). The
overload switch (12) actuates if the socket (11) is
overloaded. Following the cool down phase, the
socket (12) can be reactivated using the overload
switch (11). The socket is designed for electric tools
with a maximum power consumption of 600 W.
Important!
Do not use tools during welding work.
11. Maintenance
Remove dust and dirt from the machine at regular
intervals. Cleaning is best carried out with a fine
brush or a cloth.

12. Ordering replacement parts

Please quote the following data when ordering
replacement parts:
Type of machine
Article number of the machine
Identification number of the machine
Replacement part number of the part required
For our latest prices and information please go to
www.isc-gmbh.info
13.11.2007
10:00 Uhr
Seite 15

13. Disposal and recycling

The unit is supplied in packaging to prevent its being
damaged in transit. This packaging is raw material
and can therefore be reused or can be returned to
the raw material system.
The unit and its accessories are made of various
types of material, such as metal and plastic.
Defective components must be disposed of as
special waste. Ask your dealer or your local council.
GB
15
Table des Matières
loading

Ce manuel est également adapté pour:

15.440.91

Table des Matières