Items Supplied; Before Initial Use; Use; Preparing The Carpet - DS Produkte VC9391 Mode D'emploi

Items Supplied

1 x main unit
with dirty wa-
ter container
1 x cleaning agent

Before Initial Use

A cross-head screwdriver is required for assembly.
1. Check the items supplied for completeness (see the "Items Supplied" chapter) and
possible transport damage. If you fi nd any damage to the components, do not use
them (!), but contact our customer service department.
The dirty water container (8) is already inserted in the main unit.

Use

Preparing the Carpet

1. Vacuum the carpet or upholstered furniture which is to be cleaned thoroughly with a
vacuum cleaner. If possible, use a brush attachment to do this.
2. If possible, remove all furniture from the carpet. In the case of large items of furniture
which cannot be moved to one side, place plastic fi lm below or around the feet and
only remove it once the carpet has completely dried after it has been cleaned. The
feet could be damaged by the moisture from the carpet.
07107_DE-EN-FR-NL_A5_V2.indb 19 07107_DE-EN-FR-NL_A5_V2.indb 19
1 x upholstery nozzle
with hose
2. Insert the handle (1) into the opening of the container sup-
port (14) and align it so that the curved end of the han-
dle (1) points towards the back of the device. Fix the han-
dle (1) in place using the two screws that are supplied with
the device.
3. Insert the fresh water container (2) into the container sup-
port (14).
lugs on the fresh water container
the container
er (2) against the handle (1) until you hear it engage.
19
1 x handle
water con-
When you do this, make sure that the locking
support (14). Press the fresh water contain-
1 x fresh
2 x screw
(premount-
tainer
ed on main
unit)
(1) fi t in the recesses in
26.03.2018 10:36:27 26.03.2018 10:36:27
EN