T.I.P. AJ 4 Plus 100/57 AUT Traduction Du Mode D'emploi D'origine page 12

Please inspect the device for damage occurred during transportation. In case of damage, the retailer has to be
informed immediately, at the latest within 8 days after the date of purchase.
2. Technical Data
Model
Mains voltage / frequency
Nominal performance
Protection type
Pressure port
1)
Max. flow rate (Q )
max
Max. pressure
Max. delivery height (H )
max
Max. submersion depth 
2)
MEI
Start pressure
Max. size of the solids being pumped
Max. fluid temperature (T
max
Max. cut-in frequency in one hour
Length of connection cable
Cable type
Weight (net)
Dimensions (L x D x H)
Item no.
1)
The values were determined with free, unreduced outlet.
2.1. Information according EC guideline 2009/125/EC
Minimum Efficiency Index" (MEI) is a dimensionless variable for hydraulic pump efficiency at their best operating
2)
point as well as with partial loading and overloading. The MEI reference value for water pumps with the best
operating efficiency is ≥ 0.70. Information on the efficiency reference value can be found under
http://www.europump.org/efficiencycharts. The corresponding reference curves for the AJ series pumps can be
3. Range of use
Deep-well pumps from T.I.P. are specially designed and most efficient submersible pressure pumps for
discharging water from great depths. Owing to their compact design and professional technology, these pumps
can be used even in narrow bore-hole wells and shafts. These high-quality products with their convincing
performance data were developed for various applications involved with irrigation and for feeding on the liquid
being discharged under high pressure.
10
1)
)
AJ 4 Plus 100/57 AUT
220-240 V~ / 50 Hz
1,100 Watt
IPX8
30.93 mm (1"), female
6,000 l/h
5.7 bar
57 m
20 m
≥ 0.40
approx. 3 bar
2 mm
35 °C
30, evenly distributed
23 m
H07RN8-F
~ 12.6 kg
9.8 x 9.8 x 88 cm
30082
found at.MEI = 0.40 for Multistage
Submersible 2900 rpm.
The operation of this water pump can be
more efficient and economic at different
operating points, if for example it is
controlled by means of a variable speed
controller, which adapts the pump
operation to the system.
2