DeWalt DP2800 Guide D'utilisation page 9

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

WARNING: RISk of electRIcAl Shock
WHat can HaPPen
• Spray directed at electrical
outlets or switches, or objects
connected to an electrical
circuit, could result in a
fatal electrical shock.
WARNING: RISk of INjuRy fRom lIftING
WHat can HaPPen
• Serious injury can result
from attempting to lift too
heavy an object.
SAvE ThESE InSTrucTIonS
For FuTurE uSE
InSTALLATIon
Pressure Washer Assembly (Fig. 1)
1. Place handle assembly (A) onto frame, depress the snap
buttons, and slide the handle assembly onto the frame (B) until
snap buttons are secured in place.
cAutIoN: Risk of personal injury. Avoid placing hands between
handle and frame when assembling to prevent pinching.
HoW to PreVent It
• Unplug any electrically
operated product before
attempting to clean it. Direct
spray away from electric
outlets and switches.
HoW to PreVent It
• The pressure washer is too
heavy to be lifted by one
person. Obtain assistance
from others before lifting.
. Attach high-pressure hose (C) to spray gun (D). Make sure it is
secure.
3. Connect wand (E) to spray gun. Make sure connection is
secure.
4. Place the nozzle holder (G)
onto the panel assembly (F)
and push each nozzle holder
into place.
5. Remove the five colored
quick-connect nozzles from
the plastic bag and insert
them into correct grommet on the nozzle holder.
Nozzles are color coded to match colored
nozzles on panel assembly.
note: The high-pressure pump was filled with oil
at the factory. Always check oil level before using
(refer to Maintenance for more information).
WARNING: Risk of bursting. Use a tire pressure gauge to check
the tires pressure before each use and while inflating tires; see the tire
sidewall for the correct tire pressure.
note: Air tanks, compressors and similar equipment used to inflate
tires can fill small tires similar to these very rapidly. Adjust pressure
regulator on air supply to no more than the rating of the tire pressure.
Add air in small increments and frequently use the tire gauge to pre-
vent over inflation.
9

Publicité

Table des Matières
loading

Table des Matières