Dometic FreshWell FWX4350EHP Manuel D'installation page 22

Air conditioning
mode
Dehumidification
Sleep
Set the blower speed manually when using the "Cooling" ( ), "Heating" ( ) or "Circulating air" ( )
mode:
Display message
Symbol
Selecting the air conditioning mode:
Fig. 
Setting the blower speed manually:
Fig. 
Setting the temperature:
Fig. 
Setting the switch-on timer:
Fig. 
Setting the switch-off timer:
Fig. 
Setting the switch-on and switch-off timer simultaneously:
Fig. 
Canceling the timer settings:
Fig. 
22
Display message
Code
F1
F2
F3
on page 12
on page 12
on page 13
on page 13
on page 13
on page 14
on page 14
Description
The under-bench air conditioner regulates the interior temper-
ature to the set temperature by cooling and controlling the re-
quired blower speed. In addition, the under-bench air condi-
tioner removes moisture from the air.
In cooling mode: When the room temperature is 2 °C high-
er than the set temperature, the compressor starts to operate.
When the room temperature falls 2 °C below the set tempera-
ture, the compressor stops operating.
In heating mode: When the room temperature is 2 °C low-
er than the set temperature, the compressor starts to operate.
When the room temperature increases 2 °C above the set tem-
perature, the compressor stops operating.
Description
Low blower level
Medium blower level
High blower level
Not available in the "Cooling" (
Automatic blower mode, only available in the "Cooling" (
ing" ( ), and "Automatic" (
) mode.
) modes.
), "Heat-