Dometic FreshWell FWX4350EHP Manuel D'installation page 21

2. Press simultaneously the
The display shows the default model number.
3. Press simultaneously
• FreshWell: 02
• FreshJet: 07
• FreshLight: 11
The display shows all symbols for 5 s. Afterwards the remote control is ready for operation.
Setting the time
1. Ensure that the remote control is switched on.
2. Press and hold the
The time display flashes.
+ –
3. Use the or button to set the current time.
NOTE Press the
SET
4. Press the button to confirm the set time setting.
9 Operating
The under-bench air conditioner can be operated via the remote control.
Proceed as shown:
Switch the under-bench air conditioner on and to stand-by:
Fig. 
Select the air conditioning mode:
Air conditioning
mode
Automatic
Cooling
Heating
Circulating air
and buttons during this 5 s.
+ –
and buttons within 3 s to select the model number:
button for 2 s.
+ –
or longer than 2 s to increase or decrease the time faster.
on page 11
Display message Description
The under-bench air conditioner regulates the interior tempera-
ture to the set temperature by heating or cooling and controlling
the required blower speed.
The under-bench air conditioner cools the interior temperature
to the set temperature with the configured blower settings.
The under-bench air conditioner heats the interior temperature
to the set temperature with the configured blower settings.
The blower operates to circulate air without heating or cooling
with the configured blower settings.
21