Publicité
Les langues disponibles
Les langues disponibles
2. Clean and grease the scarifier carefully, as described in the upper chapter "Use of Grease."
3. Lightly grease the blades to prevent corrosion.
4. Store the scarifier out of reach of unauthorized persons and in a dry, clean, and frost-free place.
CAUTION! The engine must be completely cooled down before storing the lawnmower.
NOTE: When storing any type of power equipment in an unventilated or material storage
facility,
- it must be ensured that the device is stainless. Coat the device, especially cables and all moving
parts, with light oil or silicone.
- Make sure that you do not bend or kink any cables.
- if the starter cable comes loose from the cable guide on the handle, disconnect and ground the
spark plug wire, press the blade control lever, and then slowly pull the starter cable out of the
engine. Slide the starter cable into the cable guide pins on the handle.
Transportation
1. Move the transport lever into the transport position.
2. Switching off the engine
Danger!
Before transport, always switch off the engine and let it cool down and remove the spark plug
connector. The device must not be tilted during transport. When transporting the scarifier in or on a
vehicle, make sure that it does not move unintentionally.
Empty the fuel tank before transporting the device. The fuel tank cap must be firmly closed.
Original manual FX-BV240_de_en_fr_ita_es_rev01
46
Publicité
