FUXTEC BV240 Mode D'emploi page 31

16. Switch off the engine and pull out the spark plug connector before removing blockages blocking
the ejection area:
- Before releasing the blockages or removing blockages in the ejection area.
- Before removing the collection bag or before checking, cleaning, or working on the milling
machine.
- After hitting an obstacle, before recommissioning and starting work, check for damage to the
milling machine and carry out any necessary repairs. If the milling machine starts to vibrate
unusually, it should be checked immediately.
17. Switch off the engine:
- If you move away from the milling machine.
- Before refueling.
18. When turning off the engine, the ignition switch must be in the OFF position (position OFF or O).
The fuel tap position must be changed to OFF or O.
WORKING RANGE
Keep the work area clean and well exposed. Cluttered and dark areas cause accidents.
1.
Check the environment in which the machine is used and remove all objects such as stones, toys,
2.
sticks, and wires that could be caught and thrown away. This can cause damage to the machine
or injury to the user.
Do not operate this machine in areas with a potentially explosive atmosphere, e.g., in the presence
3.
of flammable liquids, gases, or dust. The device generates sparks, which can ignite the dust or
vapors.
Keep away children and people present during the operation of the machine. Distractions can
4.
cause you to lose control.
Original manual FX-BV240_de_en_fr_ita_es_rev01
32