FUXTEC BV240 Mode D'emploi page 40

5.2 TO STOP THE ENGINE
CAUTION: After the engine is turned off, the blade continues to rotate for several seconds.
1. Release the brake lever to stop the engine and blade. (Fig. 8A)
2. Set the engine switch to the "OFF" position. (Fig.8B)
Fig.8A Fig.8B
5.3 GRASS COLLECTOR
5.3.1 Working without grass collector (optional)
With the scarifier, you can work with or without a grass collector. Whenever you remove the grass
collector, the protective flap falls. When mowing the lawn without an attached grass collector, the
cut grass is thrown directly onto the ground. (Abb.9A)
5.3.2 Working with the grass collector When working with the grass collector, the cuttings are
disposed of via the grass collector. When the grass collector bag is full of clippings, you must empty
the grass collector bag and clean it.
1. Switch off the engine and wait until it stops.
2. Raise the protective flap and release the grass collector bag. (Fig.9B)
3. Empty the contents.
Fig.9A Fig.9B
5.4 INSTRUCTIONS FOR HEIGHT ADJUSTMENT
CAUTION: Never adjust the scarifier at any time without first switching off the engine.
Your scarifier is equipped with a lever for height adjustment, which offers an unlimited number of
working positions. The working positions are dimensioned in -3mm, -6mm, -9mm, -12mm, and -
15mm height.
Original manual FX-BV240_de_en_fr_ita_es_rev01
41