FUXTEC BV240 Mode D'emploi page 38

4.4 STARTER
Move the throttle lever from the engine to the cable guide. (Fig.5)
Fig.5
4.5 CUTTING DEPTH
Move the lever outward to release it from the rack. Move the lever forward or backward to adjust the
height. (Fig.6 and see 6.4).
Fig. 6
5. USER MANUAL
Maintain the engine as described in the separate engine manual for your scarifier, with gasoline and
oil. Read the instructions carefully.
CAUTION! Gasoline is highly flammable.
Store the fuel in containers specially designed for this purpose.
Only refuel outdoors and before starting the engine. Do not smoke while refueling or working with
the fuel.
Never remove the fuel tank cap or add gasoline while the engine is running or when the engine is
hot.
Do not start the engine if gasoline is spilled. In this case, the machine must be moved away from the
spillage area, and no source of ignition must be created until the petrol vapors have evaporated.
Securely fasten all fuel tanks and container lids in their original place.
Before tilting the scarifier to service the blades or drain oil, there must be no fuel left in the tank.
CAUTION: Never refill the fuel tank in enclosed spaces, while the engine is running or before
the engine has cooled down for at least 15 minutes after start-up.
5.1 TO START THE ENGINE
1. Before you start the engine, please turn the engine switch to "ON." (Fig.7A)
3. To start a cold engine, set the throttle stick to "On" (Fig. 7B). Move the throttle lever to the "Off" position.
(Fig.7B).
Original manual FX-BV240_de_en_fr_ita_es_rev01
39