ECOVACS ROBOTICS DEEBOT N79 Manuel De L'utilisateur page 24

5. Troubleshooting
No. Malfunction
DEEBOT will not
4 clean automatically at
scheduled time�
Remote Control failure
(effective control range
5
of Remote Control is
5m (16').
22
EN
Possible Causes
Time Scheduling function is
cancelled�
DEEBOT is powered OFF�
The robot's battery is low�
The robot's components are
tangled with debris�
The batteries in the Remote
Control need to be replaced�
DEEBOT is powered OFF or
DEEBOT's battery is low�
The infrared signal cannot
be transmitted because
the Infrared Emitter on
the Remote Control or
DEEBOT's Infrared Receiver
on DEEBOT is dirty�
There is other equipment
interfering with the infrared
signal to DEEBOT�
Solutions
Set Time Scheduling function as
described in section 3�4�
Power ON DEEBOT�
Keep DEEBOT powered ON and on
the Charging Dock to make sure it has
a full battery to work at any time�
Power OFF DEEBOT, clean the
Dust Bin, and invert the robot� Clean
Side Brushes and the Main Brush as
described in section 4�
Replace with new batteries making
sure they are installed correctly�
Make sure DEEBOT is powered ON
and fully charged�
Use a dry cloth or the Multi-Function
Cleaning Tool to wipe the Infrared
Emitter on Remote Control and the
Infrared Receiver on DEEBOT�
Avoid using the Remote Control near
other equipment using infrared signals�