Publicité
Les langues disponibles
Les langues disponibles
All manuals and user guides at all-guides.com
ENGLISH
• Avoid prolonged contact with dust from
cutting activity Wear protective clothing
and wash exposed areas with soap and
water. Allowing dust to get into your mouth,
eyes, or lay on the skin may promote absorption
of harmful chemicals.
• Do not use toothed blades.
• Always store cutting discs well-protected and in
a dry place, out of reach of children.
• Do not expose to rain or use in damp locations.
• Only use chop saw wheel of a
max. Thickness of 2.8 mm and a
max. Diameter of 355 mm (14").
Residual Risks
• The following risks are inherent to the use of
these machines:
– Injuries caused by touching the rotating
parts.
– Injuries caused by disruption of the cutting
disc.
• These risks are most evident:
– Within the range of operation.
– Within the range of the rotating machine
parts.
• In spite of the application of the relevant
safety regulations and the implementation of
safety devices, certain residual risks cannot be
avoided. These are:
– Impairment of hearing.
– Risk of accidents caused by the uncovered
parts of the rotating cutting disc.
– Risk of injury when changing the disc.
– Risk of squeezing fingers when opening the
guards.
Markings on Tool
The following pictograms are shown on the tool:
Read instruction manual before use.
Wear ear protection.
Wear eye protection.
Bore Diameter.
6
DATE CODE POSITION (FIG. 1)
The date code (r), which also includes the year of
manufacture, is printed into the housing.
Example:
2014 XX XX
Year of Manufacture
Package Contents
The package contains:
1 Chop saw
1 Abrasive wheel
1 Wrench
1 Instruction manual
• Check for damage to the tool, parts or
accessories which may have occurred during
transport.
• Take the time to thoroughly read and
understand this manual prior to operation.
Description (fi g. 1, 4)
WARNING: Never modify the power
tool or any part of it. Damage or
personal injury could result.
a. Lock chain
b. Spark deflector screw
c. Spark deflector
d. Base
e. Fence
f. Vise
g. Flat wrench
h. Crank
i. Vise level
j. Wheel
k. Guard
l. Spindle lock
m. Depth stop bolt and jam nut
n. Trigger switch
o. Padlock hole
p. Fence bolts
INTENDED USE
Your D28720 chop saw has been designed for the
cutting of variously shaped steel materials.
DO NOT use under wet conditions or in presence of
flammable liquids or gases.
Publicité
