Sony MEX-N5300BT Mode D'emploi page 37

For firmware update operation:
FILE ERROR: The updater is not stored in the
USB device.
 Store the updater in the USB device, then
try again (page 25).
UPDATE ERROR - PRESS ENTER: Firmware
update is not completed properly.
 Press ENTER to clear the message, then try
again.
During the update, do not turn the
ignition to the OFF position, nor remove
the USB device (page 25).
If these solutions do not help improve the
situation, consult your nearest Sony dealer.
If you take the unit to be repaired because of
device playback trouble, bring the device
that was used at the time the problem
began.
37
GB