Bartscher GE 21 Mode D'emploi page 33

Pouring liquid
•
To pour liquid, place an appropriate
container (glass, cup, mug) under the spout.
•
Press the spout lever down and hold it until
the desired amount of water is poured.
•
When finished pouring, release the spout
lever and the spout will close automatically.
•
After you have finished using the device, turn the temperature dial to the „OFF"
position, remove its plug from the socket, wait for the device to dry then pour out
the remaining liquid.
Canning
•
The device can also be used for preserving foodstuffs in jars. A maximum of 14 1-liter
jars with a diameter of 11.5 cm can fit stacked in two levels in the tank.
•
Before canning, turn the temperature dial to the „OFF" position and remove the
device's plug from its socket.
•
Prepare the jars with the desired foodstuffs. Ensure they are tightly closed before
being placed in the tank.
•
Place the included grid at the bottom of the tank to ensure better circulation of
water under and around the jars, heating them quicker.
CAUTION!
Use only the provided grid. Galvanized sieves or graded inserts are not
appropriate and may reduce circulation, reducing the device's effectiveness.
•
Place the jars on the grid and pour enough water so that the jars are immersed to
approx. ¾ of their height. The water temperature should be close to the temperature
of the jars' contents to save time and energy.
- 32 -