Dometic 10 Série Notice D'utilisation page 29

RMD10
Operating with AC power supply
A
NOTICE!
Observe the safety instructions in chapter "Safety when operating with
AC power" on page 17.
I
NOTE
When the energy supply is connected to AC mains, it is preferable to use
this energy source.
➤ Activate
.
Operating with DC power supply
A
NOTICE!
Observe the safety instructions in chapter "Safety when operating with
DC power" on page 17.
I
NOTE
• Only select operation with DC power supply (battery mode) if the
vehicle engine is running and providing sufficient voltage to the light
system, or if you are using a battery monitor.
• The cooling capacity of the refrigerator in DC operation is slightly
reduced. Operate the refrigerator with AC power supply or gas until
the desired cooling temperature is reached; only then switch to
operation with DC power supply.
➤ Activate
.
Gas operation
!
WARNING!
Observe the safety instructions in chapter "Safety when operating with
gas" on page 17.
A
NOTICE!
Do not attach the top winter cover (not in scope of delivery) while oper-
ating with gas. This prevents heat from building up and the fumes from
the refrigerator can be extracted properly.
EN
Using the refrigerator
29