benza BO 06 Manuel D'utilisation Et D'entretien page 67

Possible inconveniences along with any actions to be taken to restore the machine operation
are summarised in the following table.
PROBLEM
The head becomes
excessively hot
The harvesting combs
vibrate excessively
The tool does not work
The tool feels weak
Partial stopping during
operation
CAUSE
Dirt inside and/or worn
interior parts
The comb fixing screws are
not tight enough
The battery is drained
Burnt fuse
The battery is drained
The motor may be
overheating due to thick
vegetation or foliage
67
REMEDY
Clean and service the
harvester head
Tighten the screws
Charge the battery
Replace with a fuse to 20 Ah
Charge the battery
Move away from the thick
vegetation, wait a few
seconds and restart the tool
by pressing the switch "0-1"
Release 02-10/19