benza BO 06 Manuel D'utilisation Et D'entretien page 56

Once Company has verified that the machine has been designed and built in accordance with
the provisions of Directive 2006/42/EC and that it can be used safely in the service conditions
specified in this manual, it places the Harvester on the market and accompanies the machine
with:
- Usage instructions booklet (User manual)
- EC Declaration of conformity
- EC Marking
In designing and manufacturing the Harvester, Company has complied with obligations resul-
ting from applying related European legislative provisions and precisely the following European
provisions:
- Directive 2006/42/EC - Machinery Directive.
- Directive 2014/30/EU - Electromagnetic compatibility - EMC.
- Directive 2009/125/CE - Ecodesign directive for energy-related products..
- Directive 2012/19/EU - WEEE - Waste from electrical and electronic equipment.
To ensure compliance with the above-mentioned European regulations, the manufacturer has
applied the following European standards and technical norms:
- EN 349:1993+A1:2008: MACHINERY SAFETY - Minimum distance to keep from crushing
human body parts.
- EN ISO 3746:2010: ACOUSTICS - Determining the sound power levels of sources using
sound pressure - Control method on a reflecting surface by measuring an enveloping surface.
- EN ISO 11202:2010: ACOUSTICS - Noise emitted by machinery and equipment - Determi-
nation of emission sound pressure levels at a work station and at other specified positions
- Site control method.
- EN ISO 12100:2010: SAFETY OF MACHINERY - General principles for design - Risk as-
sessment and risk reduction.
- EN ISO 13849-1:2015: SAFETY OF MACHINERY - Parts of safety-related control systems
- Part 1: General principles for design.
- EN ISO 20643:2008: MECHANICAL VIBRATIONS - Hand-held and hand-guided machinery
- Principles for evaluation of vibration emission.
- EN 55014-1:2006/A2:2011: ELECTROMAGNETIC COMPATIBILITY - Requirements for
household appliances, electric tools and similar apparatus - Part 1: Emission.
- EN 55014-2:2015: ELECTROMAGNETIC COMPATIBILITY - Requirements for household
appliances, electric tools and similar apparatus - Part 1: Immunity.
- EN 61000-3-2:2019: ELECTROMAGNETIC COMPATIBILITY (EMC) - Part 3-2: limits for
harmonic current emissions (equipment input current <=16A per phase).
- EN 61000-3-3:2013: ELECTROMAGNETIC COMPATIBILITY (EMC) - Part 3-3: limitation
of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems, for
equipment with rated current <=16A per phase and not subject to conditional connection.
Release 02-10/19 56