Renkforce DL-1115 Mode D'emploi page 32

Setting the DMX starting address
• Push the button FUNC (5) until "Addr" is displayed and push the button ENTER (8).
• Select the desired starting address 001-512 with the UP (7) and DOWN (6) buttons.
• Push the ENTER button (8) to confirm your selection.
The following tables provide information about the effects of the settings on the individual DMX channels.
1-channel DMX operation
DMX channel Value
1 000-009
010-039
040-079
080-119
120-159
160-199
200-255
7-channel DMX operation
DMX channel Value
1 000
001-199
200-247
248-255
2 000-255
3 000-255
4 000-255
5 000-255
6 000-255
7 000-009
010-255
c) Display of the Software Version
• Push the button FUNC (5) until "Uer" is displayed and push the button ENTER (8).
• The display (3) shows the software version.
32
Function
Lights off
Sound-to-light operation, all effects
alternatingly
Sound-to-light mode, effect 1
Sound-to-light mode, effect 2
Sound-to-light mode, effect 3
Sound-to-light mode, effect 4
Sound-to-light mode, effect 5
Function
Lights off
Brightness setting all colours dark >
bright
Strobe effect slow > fast
All colours full brightness
Brightness setting red dark > bright
Brightness setting green dark > bright
Brightness setting blue dark > bright
Brightness setting amber dark > bright
Brightness setting UV dark > bright
Motor off
Motor speed slow > fast
Comment
when no sound is present > slow
automatic mode
Comment
CH2, CH3, CH4, CH5, CH6 > 000
CH1 > 000