Phone Option Menu; Audio Streaming; Listening To A Bluetooth Device Via This Unit; Operating A Bluetooth Device With This Unit - Sony XAV-601BT Mode D'emploi

Phone option menu

The Phone option menu can be configured in
"Phone."
1
Press (HOME), then touch "Phone."
2
Touch .
The Phone option menu appears.
3
Touch the desired item in the list and
configure the setting.
The items in the Phone option menu are as
follows:
"Ringtone"* 1 * 2
Uses the ringtone of this unit or the connected
cellular phone: "Internal," "Cellular."
"Auto Answer"*
Answers an incoming call automatically.
– "OFF": to not answer automatically.
– "3 sec": to answer automatically after 3
seconds.
– "10 sec": to answer automatically after 10
seconds.
"Phonebook Select"
Browses the phonebook data on this unit or
cellular phone: "Internal," "Cellular."
"Receive Phonebook"
Sends phonebook data from the connected
cellular phone.
When receiving is complete, Bluetooth device
name appears.
"Background Visualizer"
Sets Background Visualizer: "ON," "OFF."
*1 Cannot be configured during a handsfree call.
*2 Depending on the cellular phone, this unit's
ringtone may be output even if set to "Cellular."
During a handsfree call, the items in the Phone
option menu are as follows:
"Speech Quality" (Echo Canceller/Noise
Canceller Mode)
Reduces echo and noise during a call.
For normal use, set to "Mode 1."
If the outgoing sound quality is unsatisfactory,
set to "Mode 2."
"MIC Gain" (page 40)
Adjusts the microphone volume for the other
party: "Low," "Middle," "High."
42
1

Audio streaming

Listening to a Bluetooth device via
this unit
If the other device supports A2DP (Advanced
Audio Distribution Profile), you can listen to the
playback sound via this unit.
1
Connect this unit and the Bluetooth
device (page 38).
2
Reduce the volume on this unit.
3
Press (HOME), then touch "BT Audio."
The Bluetooth Audio display appears.
4
Operate the other Bluetooth device to
start playback.
5
Adjust the volume on this unit.
Note
During disconnection to the last-connected device,
touch "Reconnect" to search for the last-connected
Bluetooth device.
If the problem is not solved, touch "BT Settings," then
set the signal to "ON." Touch "Pairing >" to enter the
Paring mode.
For details on the procedure of the Paring, see
page 37.
Operating a Bluetooth device with
this unit
If the other device supports AVRCP (Audio
Video Remote Control Profile), you can control
playback via this unit.
Operations can be performed in the same way as
disc playback (page 20), except for the
following:
Do this To
Touch reduce the volume level
differences between this
unit and the other Bluetooth
device. The level is
adjustable in single steps,
between –8 and +18.
Notes
• The available operation differs depending on the
Bluetooth device. Perform unavailable operations on
the Bluetooth device.
• Depending on the Bluetooth device, it may be
necessary to touch u twice to start/pause the
playback.
• During audio streaming, some indications such as
track name, etc., may not appear on this unit.