Configuring Audio Settings; Changing The Audio Language/Format; Changing The Audio Channel; Adjusting The Audio Output Level - Dolby D Level - Sony XAV-601BT Mode D'emploi

Configuring audio settings

Note
Discs in DTS format are not supported. The sound is
not output if the DTS format is selected.
Changing the audio language/
format
The audio language can be changed if the disc is
recorded with multilingual tracks. You can also
change the audio format when playing a disc
recorded in multiple audio formats (e.g., Dolby
Digital).
1
During playback, touch the screen.
2
Touch .
The audio language menu appears.
3
Touch repeatedly until the desired
audio language/format appears.
Audio language
Audio format/channel numbers*
The audio language switches among the
available languages.
When the 4-digit input prompt appears, input
the language code (page 71) for the desired
language.
When the same language is displayed two or
more times, the disc is recorded in multiple
audio formats.
* The format name and channel numbers appear as
follows:
Example: Dolby Digital 5.1 ch
Dolby D 3 / 2 . 1
Front channel × 2 +
Center channel × 1
22
Rear channel × 2
LFE channel × 1

Changing the audio channel

When playing a VCD, you can listen to both the
right and left channel, only the right channel, or
only the left channel via both the right and left
speakers.
The options are indicated below.
"Stereo": Standard stereo sound (default)
"1/Left": Left channel sound (monaural)
"2/Right": Right channel sound (monaural)
1
During playback, touch
repeatedly until the desired audio
channel appears.
Note
You may not be able to change the audio setting
depending on the disc.
Tips
• Operation via the remote commander by pressing
(AUDIO) repeatedly is also available.
• The audio channels can be changed by pressing
AUDIO on the remote commander when VCD is
selected.
Adjusting the audio output level
— Dolby D level
You can adjust the audio output level for a DVD
recorded in Dolby Digital format, to reduce the
volume level differences between discs.
1
During playback, touch
2
Touch "DVD Audio Level."
3
Touch –/+ repeatedly to adjust the
output level.
The output level is adjustable in single steps,
between –10 and +10.
To close the play menu, touch
.
.