Stand Mixer Tips - Hamilton Beach Eclectrics 63227 Guide De L'utilisateur

Stand Mixer Tips

Place liquid ingredients in bowl first
and then add dry ingredients.
Always stay near Mixer during use.
To begin mixing, use the low setting
until the ingredients are thoroughly
combined. This will reduce spattering.
Adding Ingredients
Always add ingredients as close to
the sides of the bowl as possible, not
directly into the moving beater. The
Pouring Shield can be used to help
add ingredients.
• Use the flat beater attachment to
mix:
CAKES
COOKIE DOUGH
FUDGE
POTATOES
• The Mixer Head locks down for
thorough mixing.
• When mixing thin batters use medi-
um speeds and frequently stop the
mixer to scrape the sides of the
bowl with a spatula. Place liquid
ingredients in the bowl first and
then add dry ingredients.
10
General Mixing Tips
Cake Mixes
When preparing package cake mixes,
use Speed 2 for low speed, Speed
4 for medium speed, and Speed 6
for high speed. For best results, mix
for the time stated on the package
directions.
Liquid Mixtures
Mixtures containing large amounts of
liquid ingredients should be mixed at
lower speeds to avoid splashing.
Increase speed only after the mixture
has thickened.
Thin Batters
When mixing thin batters use medi-
um speeds and frequently stop the
mixer to scrape the sides of bowl
with a spatula.
Flat Beater Tips
• Cookie dough is one of the thickest
doughs to mix. Make it easier by
following these tips:
✔ Have butter or margarine at room
temperature.
✔ Add ingredients one at a time,
thoroughly mixing after each
addition.
✔ Add flour one cup at a time.
✔ If the mixer seems to struggle,
increase the speed setting.
Dough Hook Tips
• Always stay near Mixer during use.
• If a spoon is accidentally caught in
an attachment or the motor stalls,
slide the Setting Control to O then
unplug. Clear the obstruction or
reduce the amount of mixture in
the bowl. Let the motor cool for
5 minutes before continuing.