Basics Of Operation; Remote Control; Status Leds - DURAVIT SensoWash Slim Notice D'utilisation

4. Basics of operation

4.1 Remote control

®
SensoWash is operated via the remote control. Settings are altered via the remote
control as well.
Press the respective button on the remote control to switch on a function. The
button lights up white briefly.
To switch off a shower function, press "Stop"
If the remote control is not available or the batteries are empty, then basic functions
can also be switched on or off from the side control buttons.
> Press the lock of the "Battery Compartment"
> Insert two lithium batteries (CR2032) with + facing upwards.
> Close the "Battery Compartment"

4.2 Status LEDs

Red illuminated:
Green illuminated:
Green flashing:
Orange flashing:
Red flashing:
8
.
SensoWash ® is in the „Standby mode", all functions cannot
be used.
SensoWash ® is in the „On mode", all functions can be used.
SensoWash ® is in the „Initialization" process, only „Power"
A on the seat unit can work.
SensoWash ® is in the „Internal drainage mode".
Malfunction. Disconnect main power supply and proceed
with chapter 9.
7 on the remote control.
8
to open it.
EN
23