DURAVIT SensoWash Slim Notice D'utilisation page 35

Problem
A water leak exists. Malfunction.
Remote control
Icons on remote
control flash during
operation. (instead
of beeing illumina-
ted)
The remote control
does not work.
Rearwash / Ladywash
Switching between
the Rearwash and
Ladywash takes too
long.
Potential cause
The batteries are low.
No batteries are inserted. > Insert batteries.
The batteries are flat.
The battery connections
are reversed.
The remote control is
locked ("Spray wand
position" 5 and "Water
6
temperature" flash
three times).
The remote control is
defective.
When switching between
Rearwash and Ladywash,
the spray wand moves
back then forward again
after self-cleaning is
complete.
Solution
> Close the main valve for
the water supply.
> Disconnect the power
supply.
> Call the installer.
> Change the batteries.
> Change the batteries.
> Insert the batteries the
correct way.
> Unlock the remote con-
trol.
> Contact your installer.
This is normal.
Ch.
4.1
EN
4.1
4.1
4.1
6.3
33