DURAVIT SensoWash Slim Notice D'utilisation page 36

Problem
The water spray in-
tensity is too weak.
The water tempe-
rature is not warm
enough.
EN
The water spray
from the spray
wand suddenly
stops.
A jet of water is not
emerging from the
spray wand.
Night light function
The night light does
not come on.
The night light
stays on conti-
nuously.
34
Potential cause
The water spray intensity
has been set to Low.
The water supply hose
has buckled.
The water temperature
has been set to Off or
Low.
The function automa-
tically stops after 2
minutes.
The spray nozzle is
clogged.
The night light has been
set to Off mode.
The night light is in Auto
mode and the ambient
light is bright.
The night light has been
set to On mode.
The night light is in Auto
mode and the ambient
light is dim.
The ambient light sensor
window is not clean.
Solution
> Adjust the "Water spray
intensity" 2 and/or
Medium or High.
> Contact your installer.
> Adjust the "Water tem-
perature" 6 to Medium
or High.
This is normal.
> Clean the spray nozzle.
This is normal.
> Set the night light to Auto
or On mode.
This is normal.
This is normal.
> Set the night light to Auto
or Off mode.
This is normal.
> Clean the "Ambient light
sensor" D window.
Ch.
6.2
3 to
6.2
7.2
6.3
6.3