Kohler K-6505 Guide D'installation page 9

5. Install the Handle Trim
Close the valves (hot = clockwise, cold = counterclockwise).
Install a skirt over one of the valves and onto the escutcheon.
Slide a spline adapter onto the valve stem and secure with the
screw.
Position the handle assembly over the spline adapter.
Thread the skirt into the handle assembly until tight.
Repeat for the other valve.
Kohler Co.
All manuals and user guides at all-guides.com
Screw
Spline Adapter
Handle
Skirt
Assembly
Spline
Valve
Adapter
Stem
Skirt
9 1011134-2-B