EUFAB 11243 Mode D'emploi page 6

5.4 Fastening the tyres
Press the unlocking lever (Position 5 in the Overview) upwards, Figure 3.
Now you can pull the tensioning belt (Position 6 in the overview) from the
turnbuckle (Position 4 in the overview). Place the bicycle on the bicycle
rack and fasten it with the frame holder using the instructions of your
bicycle rack. Push the wheel stoppers up to the bicycle tyres and tighten the
knurled nuts.
Place the tensioning belt around the rim of the bicycle and insert the
tensioning belt into the turnbuckle. Position the rim protector (Position 7 in
the overview) so that the tensioning belt is unable to damage the rim as a
result of friction experienced during transport, Image 4. The tensioning belt
is tightened by pulling the turnbuckle up several times.
6. Maintenance and care
When used as directed, the wheel stopper is maintenance-free. Clean the wheel stopper with a soft, dry cloth only. Do not use
aggressive cleaning agents or those containing solvents. When heavily soiled, use a brush and water to clean the teeth of the
tensioning belt and to guarantee a flawless functioning of the turnbuckle.
7. Notes regarding environmental protection
Please dispose of the wheel stopper via the recycling bin or the public/municipal collection points.
The materials are recyclable. You make an important contribution to protecting our environment by recycling, material utilisa-
tion or other forms of reusing waste equipment!
8. Contact information
EAL GmbH
Otto-Hausmann-Ring 107
42115 Wuppertal, Germany
6
All manuals and user guides at all-guides.com
+49 (0)202 42 92 83 0
+49 (0) 202 42 92 83 – 160
Image 3: Release the
tensioning belt
Image 4: Rim protector
info@eal-vertrieb.com
www.eal-vertrieb.com